An AMPROTEQ A100 battery storage container on a concrete plinth at dusk in a South African industrial yard
Engineered for the lowest cost per delivered kWhHow we measure it

Energy independence, engineered, built and financed.

AMPROTEQ develops utility and industrial-scale battery energy storage for South African industry — containerised systems from a 10 ft 1 MWh block to 6.25 MWh, integrated with solar generation, medium-voltage conversion and the Solaris™ energy management system. Buy the plant outright, or buy only the electricity under a 10–25 year PPA.

Centurion, Gauteng1 – 6.25 MWh systemsLiquid-cooled LFPOutright or 10–25 yr PPADirector-led projects
1Liquid-cooling unit · pack held within 3 °C
2Cluster controller · cell voltage and temperature
3Liquid-cooled packs · five per cluster
4Fire suppression · detection and discharge line
5Four clusters · 1 044 kWh installed
6Factory-integrated · tested before dispatch
The A100 block

One container.
Everything inside it.

Four liquid-cooled clusters, four PCS modules, fire suppression and the Solaris™ controller, assembled and tested before dispatch. Nothing arrives on your slab as a kit of parts.

  1. 1Liquid-cooling unit, 3 °C spread
  2. 2Cluster controller
  3. 3Liquid-cooled packs
  4. 4Fire suppression line
  5. 5Four clusters, 1 044 kWh
  6. 6Tested before dispatch
Visualisation
6.25MWhLargest system
20yearBattery design life
25yearLongest PPA, augmentation included
+966%Eskom average tariff, 2007/08–2025/26Source: Eskom tariff history
The number that decides the project

Engineered for the lowest cost per delivered kilowatt-hour.

Levelised cost of storage is every rand the system will ever cost, divided by every kilowatt-hour it will ever deliver. We attack both sides of that fraction: Tier‑1 cells integrated before dispatch, inside a liquid-cooled block that keeps delivering long after an air-cooled one has faded.

We publish the method, not a league table: every proposal states its LCOS with the inputs listed, so any offer can be compared on the same basis.

LCOS =
Lifetime cost↓ driven down
Lifetime energy delivered↑ driven up
01

Tier‑1 cells, nothing less

314 Ah LFP prismatic cells from a Tier‑1 manufacturer — serialised, traceable and tested before they leave the line.

02

More cycles from every cell

Liquid cooling holds the pack within 3 °C, so the cells age slowly and age together. More delivered energy from the same capital.

03

Fewer parts to buy

PCS, cooling and fire suppression are inside the container. One slab, one connection, one warranty.

04

Zero capital, if you prefer

Take the plant under a 10–25 year PPA and pay only for the energy it delivers. The LCOS becomes our problem, not yours.

01 · The Problem

Electricity stopped
being a fixed cost.

Between 2007/08 and 2025/26 Eskom’s average tariff rose from 19.9 to 211.9 c/kWh — up 966 % — while consumer prices rose 157 %. NERSA has already approved a further 8.76 % from April 2026 and 8.83 % from April 2027. For a large power user that is a balance-sheet problem, and it compounds every April.

Storage is what turns an exposed, escalating tariff into a known cost of energy. It moves consumption out of the expensive part of the day, holds your notified maximum demand down, keeps the solar you would otherwise export for a fraction of the import price, and keeps the plant running when the network cannot.

Eskom average tariff vs. CPI Eskom tariffInflation (CPI)

Sources: Eskom Distribution, historical average prices (2026); World Bank / Stats SA CPI; NERSA decision of 5 March 2026. Data and notes.

Renewable generation is now the cheapest energy South African industry can buy. Storage is what makes it dispatchable, bankable and finally fixed.

AMPROTEQ (Pty) Ltd · Utility & industrial battery energy storage · Centurion, Gauteng
02 · What We Deliver

Three parts,
one integrated plant.

We are a developer, not a reseller. We size the system against your measured load, specify it against your site conditions, and stand behind the performance for the life of the agreement.

Two AMPROTEQ 20 ft battery containers and a transformer at the edge of a solar plant
01 — Storage & Generation

Containerised BESS

Six liquid-cooled LFP systems from 1 MWh to 6.25 MWh, each available at 2, 4 or 6 hour duration, with matched power conversion from 500 kW to 3 125 kW. Paired with bifacial PV, medium-voltage conversion and a grid interface built to South African code.

The systems →
02 — Control

Solaris™ EMS

The energy management system decides, every few seconds, whether the site draws from solar, the battery, the grid or the generator — against your tariff calendar, your notified maximum demand and your state of charge. It is where the savings are actually made.

Inside Solaris →
03 — Commercial

PPA, purchase or hybrid

Take the plant onto your balance sheet, or take none of it: under our PPA, AMPROTEQ designs, funds, builds, owns and maintains the microgrid on your site and you pay only for the energy you use, at a rate fixed for 10–25 years.

Commercial models →
03 · The 20 ft platform

Two to 6.25 MWh.
One footprint.

An AMPROTEQ 20 ft high-cube battery storage container with louvered end door, three battery doors and an air-conditioning door
6.058 × 2.438 × 2.896 m 20 ft high-cube · A200 to A625 Liquid-cooled LFP · 0.5C or lower Integrated cooling, fire & controls 11 / 22 / 33 kV via MV skid
From a cell to the grid

Eight steps.
One power path.

Every plant starts as a single 314 Ah cell and ends at the point of connection. Follow the whole path on the Systems page.

01 · Assess

Start with the meter.

Twelve months of interval data, your tariff schedule and your notified maximum demand. We model the site as it actually behaves — not as a nameplate suggests it should.

02 · Design

Size it against the load.

PV array, storage capacity, conversion and medium-voltage interface are sized together against the measured profile and the tariff calendar, then modelled over 25 years of escalation.

03 · Integrate

Built indoors, not on your slab.

Racks, power conversion, switchgear, liquid cooling and fire systems are assembled and cabled into the container at the factory, then powered up and burned in before anything ships. Nothing arrives on your slab as a kit of parts.

04 · Commission

Witnessed, then energised.

Factory acceptance testing against your protection settings and grid-code requirements, then installation, commissioning and grid compliance sign-off on site.

05 · Operate

Twenty years of dispatch.

Solaris runs the plant against the tariff calendar and the demand limit. We maintain it, monitor cell-level health and carry the performance obligation for the term. How we deliver →

04 · What It Earns

Five ways the same
megawatt-hour pays.

A well-sized system earns from several places at once, every single day. We model each of these against your actual interval data and tariff before you commit a rand — so the payback in the proposal is the payback you get.

* Illustrative 2026/27 values for a large-power-user site; every proposal is priced on the site’s own tariff and fuel records. Peak windows: Eskom Megaflex and Miniflex, 2026/27.

Contribution to annual benefit
Reference plant — 1 MWp PV + 2 MWh BESS
R 17.5mTotal capex
R 4.85mNet return, year 1
33.4%IRR over 10 years
37.0%IRR over 20 years

Modelled at R3.50/kWh offtake with 9% annual escalation (NERSA approved 8.76% for 2026/27 and 8.83% for 2027/28), 8% WACC, 12% system losses and a 5 kWh/kWp solar yield factor. Indicative — every site is modelled against its own interval data.

05 · What It Saves

Put your own
numbers in it.

Move the three sliders to your site for a first-order answer. For a model built from your actual bill and tariff, month by month, open the Savings Studio — it reads the bill in your browser and never uploads it.

Assumptions: a peak-to-off-peak spread of R1.85/kWh on a large-power-user time-of-use tariff, 88% AC-to-AC round-trip efficiency, and one full cycle per working day. Excludes the demand-charge reduction and any solar self-consumption, both of which usually improve the answer.

Indicative annual saving
R2.14m
Current annual spendR14.9m / year
Saving as share of bill14.4% of the bill
Energy shifted4 500 kWh / day
System that fitsA500
Usable storage5 MWh usable
Model it from your bill in the Savings Studio Or send us twelve months of interval data →

This is an estimator, not a quote. A real number comes from your half-hourly meter data, your notified maximum demand, your tariff structure and your site constraints — which is exactly what a load study produces, at no cost and with no obligation.

0.5CEvery system rated at or below half-C, so cells are never worked hard
3 °CLiquid-cooled deviation across the pack, against 12–18 °C for forced air
20 yrBattery design life, with augmentation priced in for longer terms
<10 msTransfer to island mode with the static transfer switch
06 · How You Buy It

Own it, or just buy the electricity.

01 · Power Purchase Agreement

Zero capex. A rate you can plan around.

AMPROTEQ designs, funds, constructs, owns, operates and maintains the hybrid microgrid on your site. You sign a 10–25 year take-or-pay agreement and buy kilowatt-hours at an agreed rate with a fixed annual escalation. Terms beyond the battery’s 20-year design life include planned augmentation, priced in from day one.

  • Zero capex
  • Fixed escalation
  • Maintenance included
  • 10–25 year term
02 · Outright Purchase

The plant on your balance sheet.

Buy the microgrid, or any component of it — BESS, PCS, medium-voltage skid or the Solaris controller — as a supplied and commissioned asset. We can arrange standardised financing with commercial banks for well-defined system configurations, and carry the O&M under a separate maintenance agreement.

  • Asset ownership
  • Bank financing arranged
  • Optional O&M
03 · Hybrid

Co-invest where it suits you.

Own the portion that fits your capital plan — often the solar array — and take the storage and control layer under a PPA. Terms are structured around how you want the asset, the risk and the escalation split.

  • Split ownership
  • Shared risk
  • Tailored escalation
07 · Who We Serve

Utility and industrial scale.

Sites where energy is a material line item and interruption has a cost measured in production, not inconvenience.

08 · Why AMPROTEQ

Engineered for
South African sites.

Imported hardware fails here for local reasons — coastal corrosion, 40 °C ambients, dust, unstable networks and a grid code that does not look like Europe’s. Every system we deliver is specified against those conditions, engineered to South African grid code and supported by people who can be on your site.

01

C5 corrosion class

Enclosures specified to ISO 12944 class C5 — suitable for coastal KwaZulu-Natal and Western Cape sites as well as inland industrial atmospheres.

02

−30 to +55 °C

The operating range of the 20 ft systems (A100: −25 to +60 °C). Liquid cooling holds cell temperature deviation to 3 °C through a Highveld summer, protecting the warranty position the financial model depends on.

03

Grid-code compliant

NRS 097-2-1 and South African RPP grid-code capability, with protection settings proven against your utility’s requirements before dispatch.

04

Local support

Commissioning, maintenance and spares handled from Gauteng — not a support ticket routed to another continent and another time zone.

09 · Next Step

Send us twelve months
of interval data.

That, your tariff schedule and your notified maximum demand is enough for a first sizing, an indicative capex and a PPA rate — within five working days, at no cost and with no obligation.